Wuxi Fenigal Science & Technology Co., Ltd. a été créée pour fournir des services aux entreprises de l'industrie chinoise.
Fabricant et fournisseur de produits industriels et d'éclairage
Wuxi Fenigal Science & Technology Co., Ltd. a été créée pour fournir des services aux entreprises de l'industrie chinoise.
Fabricant et fournisseur de produits industriels et d'éclairage
| Lieu d'origine: | CHINE |
| Nom de marque: | Dupont |
| Certification: | CE |
| Numéro de modèle: | SFP-2860 |
| Documents: | Model SFP-2860, SFD 2860, S...80.pdf |
| Quantité de commande min: | 1 pc |
|---|---|
| Prix: | Négociable |
| Détails d'emballage: | Emballage d'exportation standard |
| Délai de livraison: | 5- 8 jours de travail |
| Conditions de paiement: | Western Union, T / T |
| Capacité d'approvisionnement: | 60000 unités par mois |
| 2860 Module Flow Range: | 2.0 - 6,1 m3 / h | 2860 MODULE FLOW RACKET MEMBRANE: | 51 m² |
|---|---|---|---|
| 2860 Diamètre des pores nominaux du module: | 0,03 µm | 2860 Matériau du module: | PVDF |
| Diamètre du module 2860: | 8 pouces | 2860 Paramètres de direction de flux de modules: | Structure de pression externe, filtration sans issue |
| Composant NaOCL (Max.): | 2 000 mg / L | Pression de lavage maximum du composant: | 2,5 bar |
| Utilisation principale des composants: | Prétraitement du traitement de l'eau | Avantages: | Précision de filtration élevée |
| Attribute | Value |
|---|---|
| Membrane Area | 51 m² (549 ft²) |
| Flux Range (25°C) | 40–90 LMH |
| Max TMP | 2.1 bar |
| Flow Rate | 2.0–6.9 m³/hr |
| Weight (Empty) | 48kg |
| Target Applications | Industrial wastewater reuse, Seawater pretreatment for desalination, Compact containerized plants, Cooling tower blowdown recovery |
| Parameter | SI Units | US Units |
|---|---|---|
| Filtrate Flux @ 25ºC | 40-120 l/m2/hr | 24-70 gfd |
| Flow range | 2.0 - 6.1 m3/hr | 9.2 - 26.7 gpm |
| Temperature | 1-40ºC | 34-104ºF |
| Max. inlet module pressure (@ 20ºC) | 6.25 bar | 93.75 psi |
| Max. operating TMP | 2.1 bar | 30 psi |
| Max operating air scour flow | 12 nm3/hr | 7.1 scfm |
| Max backwash pressure | 2.5 bar | 36 psi |
| Operating pH | 2-11 | |
Proper start-up of a UF system is indispensable for preparing the membranes for operational service and preventing membrane damage. Adhering to the correct start-up sequence also contributes to ensuring that the operating parameters of the system conform to the design specifications.
Before commencing the system start-up procedures, membrane pretreatment, installation of the membrane modules, instrument calibration, and other system checks should be accomplished. Kindly refer to the product technical manual.
Personne à contacter: Mr. Harry
Téléphone: +86-13646187144